Description
The Reece EV Protection Kit has been created as the complete ‘one-stop shop’ for a workshop to implement safety. This pack protects every part of the body and will guarantee your safety and contains most items stipulated by VAG in their "Personal Protective Equipment for Experts".
Arc Flash Jacket "Comfort Grey", APC 2, HRC 2, 22 cal/cm²
- arc flash tested according to IEC 61482-1-1: EBT= 22 cal/cm², ELIM = 16 cal/cm²
- arc flash tested according to IEC 61482-1-2:2014 APC 2 (class 2)
- excellent breathability, RET-value 4,00 m² PA/W according to EN 31092 / ISO 11092
- heat and flame protection according to EN ISO 11612:20158 A1+A2 /B1/C1/F1
- welding protection according to EN ISO 11611:2015 class 1, A1+A2
- protection against static electricity according to EN 1149-5:2008
- inherent flame proofing
- with high stand up collar, plastic staple zipper, hidden push-buttons, inside pockets and reflective stripes at the pockets, sleeves and front/back part.
- embroidered signs with class specification at the collar
- 320 g/m² fabric, 55% modacrylic, 44% cotton, 1% antistatic component
Arc Flash Trousers "Comfort Grey", HRC 2, 22 cal/cm²
- arc flash tested according to IEC 61482-1-1: EBT= 22 cal/cm², ELIM = 16 cal/cm²
- arc flash tested according to IEC 61482-1-2:2014 APC 2 (class 2)
- excellent breathability, RET-value 4,00 m² PA/W according to EN 31092 / ISO 11092
- heat and flame protection according to EN ISO 11612:20158 A1+A2 /B1/C1/F1
- welding protection according to EN ISO 11611:2015 class 1, A1+A2
- protection against static electricity according to EN 1149-5:2008
- inherent flame proofing
- attached waistband with 7 belt loops and elastic band, 2 side seam slant pocket, 1 hip pocket, 1 inch rule pocket, 1 bib pocket, plastic staple zipper
- legs and pockets with reflective stripes (3M™ Scotchlite™)
- 2 knee pad pockets with velcro fastener, twice adjustable
- embroidered signs with class specification on the left leg pocket
- 320 g/m² fabric, 55% modacrylic, 44% cotton, 1% antistatic component
- color: navy/royal blue
Classic solution for temporary additional Arc Flash protection when in switching rooms and substations.
When worn with correct hood and gloves this gives temporary Switching suit level protection.
- IEC 61482-1-2: 2009 APC 2 (Class 2)
- IEC 61482-1-1 ATPV 47 cal/cm2
- EN ISO 11612: 2015
- EN ISO 11611: 2015
Electrical Safety Gloves 360mmL x 1.0mm Thick Class 0
SHOULD BE USED WITH A LEATHER OVERGLOVE FOR MECHANICAL PROTECTION
Due to the gloves natural latex base our insulating gloves offer you high dielectric characteristics. The Insulation of hands is determined by the class number and nominal supply voltage.
- Fully insulating gloves each test stamped
- Manufactured to EN60903
- Pneumatic glove tester available to carry out your own air inflation test as recommended by the EN60903 and IEC903 standards (for class 00 & class 0)
- Electrical re-testing service available for Class 1 and above gloves
- Mechanical resistance obtained with a leather over glove
- High dielectric characteristics
- Ergonomic shape
- Lightly powdered
- Easy to slip on and off
- Natural latex base
- Length 360 mm
- Category AZC
- Various sizes available
- Cut Edges
Arc Rated Balaclava - Double Layer 34.0cal/Cm2
- For a higher arc flash protection of the head (360 degree protection)
- Double layer fabric: 7.8 oz/yd²
- Colour: dark blue
- Single size
- ASTM F1959: ATPV: 34.0 cal/cm² (fabric rating)
- ASTM F2178: ATPV: 26 cal/cm² (together with ELE9HINT shields)
Arc Rated Visor With Helmet 26cal/Cm2
Standards / Certificates
- DIN EN 166: 2001
- DIN EN 170: 2002
- ASTM F2178-12
- ASTM F1959/F1959M-14 (Balaclava)
Certificate of Compliance
- ANSI / ISEA Z.87.1-2015
Certificate of Conformity
- EU Directive 89/686/EWG
Certification - CE Test Certificate
Volta - Electrical Hazard Trainer Tested To 18kV
ASTM F 2413-18 M/I/C PR EH
Arc Flash Protection Gloves 45.0cal/Cm2
- Arc flash tested according to IEC 61482-1-1
- Arc flash tested according to IEC 61482-1-2:2007 class 2 test level W(LBP)= 318 kJ
- Additional tested with a higher test leve W(LBP)= 630 kJ
- Protection against mechanic risks according to EN 388:2003
- Protection against thermal risks according to EN 407:2004
- Back side of glove made of double-textile
- Perfect fit via soft and flexible leather
- Soft leather allows optimum sensitivity
- No perspiration
IF you can't see your size please call us.
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.